|
|
Firmware Upgrade for PF560 |
Print
|
DO NOT APPLY THIS UPDATE TO 8" PICTURE FRAME MODEL PF800!
THIS UPDATE IS ONLY FOR 5.6" PICTURE FRAME PF560.
The following file is the latest Firmware Upgrade for the PF560 Digital Photo Frame:
FIRMWARE VERSION: PF560_V5.3 FILE (Click to Download, 2MB):
CHANGES:
- Increase total number of images in SlideShow to ~250. (Previous limit was ~143.)
- Space between photo and edge of screen is reduced.
Download File (1MB)
Follow these instructions to update the firmware on your picture frame:
1. Download and Unzip the firmware file above and copy the file to a memory card that the picture frame supports. If you are not using a computer that supports a memory card slot, you will need a USB Memory Card Reader to perform this function. These devices are inexpensive and are available at all major computer retailers.
2. Insert the memory card containing the firmware file into the picture frame.
3. The following screen appears:
Use the LEFT and RIGHT ARROW keys of the remote control or the buttons on the back of the unit to select YES. Press ENTER.
4. The screen will show that the firmware update is being written:
5. When the update is finished, you will be prompted to power off the unit:
6. Power the unit OFF and remove the memory card. Delete the firmware file from the memory card.
To check and see the current version of the firmware:
1. Power the unit ON with no memory card inserted. The following screen appears:
2. Select the WRENCH icon with the LEFT and RIGHT ARROW keys and press ENTER.
3. You can see the current BIOS version on the lower line of the following screen:
|